Add case details
Enter the vehicle details and describe the fault or symptoms. Optionally upload a scan-tool screen photo or PDF report and add the DTCs.
JPGPNGPDFDTC
WEB APPLICATION FOR AUTOMOTIVE WORKSHOPS
From the fault code
to the next correct test.
DiagVima organises scan-tool findings and vehicle symptoms into a clear, practical test sequence — with measurement points, test conditions and expected values.
- ✓ Any modern browser
- ✓ No installation
- ✓ English interface
VEHICLEVW Golf 1.6 TDI2011 · CAYC
SOURCEScan-tool image
P0299ACTIVE
P0401INTERMITTENT
C0035STORED
01
FIRST CHECKPower supply and ground test
PRIORITYMultimeter · KOEO · compare with battery voltage
02
NEXT STEPLive data and actuator test
Scan tool · engine at operating temperature
A SIMPLE WORKFLOW
Three steps. A clear picture.
DiagVima does not replace the technician. It brings together the workshop’s existing information and turns it into a structured diagnostic plan.
Verify the case
Confirm the vehicle, engine, DTC status, fault state and symptoms before the report is created.
VINEngineStatus
Follow the test path
Review probable causes, measurements, required tools and next steps in clear, ranked cards.
✓ Quick Report ready
A DIGITAL PARTNER FOR DIAGNOSTIC THINKING
Save up to 2 hours of diagnostic research per vehicle.
Symptom-based fault diagnosis assistant
Instead of spending hours searching forums, groups or wiring diagrams, enter the symptoms and receive a ranked checklist of one to five tests in seconds.
WHY A WORKSHOP WOULD CHOOSE IT
Practical value in every diagnosis.
01
TIME & MONEY
Save time and money
The technician does not start from scratch. Symptoms and DTCs become a structured diagnostic path, turning research time into productive workshop time.
TRADITIONAL RESEARCHup to 2 hours→DIAGVIMAwithin seconds
02
LOWER RISKFewer comebacks and unnecessary parts
Check a €20 filter, a connector or a ground before replacing a €1,000 pump or an ECU without sufficient evidence.
03
STAFF DEVELOPMENTA clear path for less experienced technicians
Junior technicians can follow structured test steps without constantly interrupting the senior technician.
04
OEM-STYLE MINDSETA structured diagnostic protocol
Focus on VIN, actual data and measurements — live data, voltages and leak-off — before reaching a conclusion.
Times are indicative and depend on the completeness of the information, fault complexity and connection quality.
WHERE DETAIL MATTERS
Not only what may be wrong — but how to test it.
The real value lies in the next step: what to measure, which tool to use, under what conditions and what result to expect.
See it with a real case →01
Specific measurements
Multimeter, oscilloscope or scan tool; test conditions and indicative expected values whenever the available information is sufficient.
TOOLMultimeterCONDITIONKOEOTARGETSupply voltage
02
Smart test order
Fast, safe and low-cost checks first. More complex scenarios only when needed.
03
Correlated findings
DTCs, symptoms and live data are considered together to avoid blind parts replacement.
04
Clear confidence boundaries
Recorded facts, probable causes and items requiring confirmation on the vehicle remain clearly separated.
05
Diagnostic dialogue with the technician
DiagVima asks focused questions and lets the technician add actions, checks or measurements completed after the first report. The diagnostic path then adapts to the new findings and proposes the next steps.
D
Has the sensor supply been checked?
Yes. I measured 5.02 V and cleaned the connector.
TD
Recorded. Next: compare the signal at idle and 2,500 rpm.
QUICK REPORTDiagnostic test sequence
!
Before you begin Confirm the actual DTCs, their status and available freeze-frame data.
1
Visual inspection and basic suppliesConnectors · wiring · grounds · battery voltage
INITIAL2
Compare command with actual positionLive data · idle and controlled RPM increase
MEASURE3
Mechanical test only if requiredProceed after supply and signals are ruled out
NEXTQUICK REPORT
The right information, exactly where you need it.
Clear cards, visible priorities and technical guidance without unnecessary text — built for use in the workshop.
- ✓ Concise assessment and recorded data
- ✓ Probable causes ranked by priority
- ✓ Test steps and required tools
- ✓ Items requiring confirmation
AUTO ELECTRICIAN
From the signal to the root cause.
Organise tests with a multimeter, oscilloscope and live data around the actual evidence from the case.
SuppliesGroundsSignalsCAN
AUTOMOTIVE TECHNICIAN
Fewer assumptions. A clearer path.
Probable causes arranged in a practical order to help avoid unnecessary parts replacement.
EngineFuelEmissionsSensors
WEB BUILT FOR THE MODERN WORKSHOP
100% WEB APPLICATION · ENGLISH INTERFACE
Clear technical language. Productive work on any screen.
Menus, instructions, technical cards and reports in English. Open DiagVima in a browser on a desktop, laptop, tablet or phone — with no software installation.
DesktopLaptopTabletMobile
SEE IT IN PRACTICE
Have a real fault?
Let’s test it together.
Request a DiagVima demonstration using a real case from your workshop.
Send with Gmail →Opens a ready-to-send message in the visitor’s Gmail account.